Shearing service

Spread the love

Scope

Material    
Material   PO, CR, GI/GA/EG, ZAM, Thép không gỉ (SUS)
Thickness mm 0.3 – 6.0 (với cuộn)

tối đa 13 mm (với nguyên liệu tấm)

Width of Coil mm từ 100 – 1,600
Width of Sheet mm từ 100 – 3,000
Weight of Coil   Tối đa 25,000
Inner diameter of Coil mm 508/610/762
Outer diameter of Coil mm Tối đa 2,000
Product    
Sheet length mm 30 – 6,000
Tolerance of length mm ± 0.5
Diagonal tolerance    
Burr mm ≤ 0.05
Laminating   Giấy, Vinyl
Number of lines   05 lines

SPECIFICATION OF SHEARING LINE 0.3-3.2 x 1,600

Manufacturer SONODA – JAPAN
Materials SPCC, SGCC, PPGI, SUS 304, 430.
Thickness 0.3 – 3.2mm
Width 350 – 1,600mm
Inner diameter 508/610/762 (mm)
Outer diameter  2,000 mm max.
Weight 25,000 kg
Length of Sheet 300 – 4,200 mm
Number of cuts 100 times/min max.
Length tolerancet + 0.3mm, -0mm for each 1,000mm cut length at the synchronous speed of the line; ± 0.5mm for both ends of coil.
Diagonal tolerance ±0.5mm per 1,000mm length.
Flatnesst 3mm per 1,000mm length (using JIS first grade standard material)
Surface Scratch-free/Mark-free
Line speed 60 m/min max.

SPECIFICATION OF SHEARING LINE 1.2-6.0 x 1,600

Manufacturer WELLTIME – TAIWAN
Materials SPCC, SPHC-PO (Max. tensile strength: 980 N/mm2).
Thickness 1.2 – 6.0 mm.
Width 800 – 1600 mm.
Outer diameter 900 – 2000 mm.
Inner diameter 508/610/762 (mm) 
Weight 25,000 kg. max
Line speed 44 m/ min. max
Number of cuts 20 times/ min max.
Length of Sheet 1200 mm – 6000 mm.
Length tolerance ±0.5 mm for below 1,000 mm length, add ± 0.1 mm for every 2,000 mm of product length.
Diagonal tolerance 0.8 mm for dimension 1200 x 2400 mm.

SPECIFICATION OF MINI SHEARING LINE 0.3-2.5 x 400 

Manufacturer WELLTIME – TAIWAN
Materials SPCC, SUS, AL
Thickness 0.3 – 2.5 mm
Width 100 – 400 mm
Outer diameter 650 – 1,900 mm
Inner diameter 508 mm
Weight 5,000 kg.
Line speed 60 m/min max.
Number of cuts 250 times /min max
Length of sheet 150 – 2,000 mm
Length tolerance +0.3mm for each 1,000mm cut length (± 0.5mm for both ends of coil)
Diagonal tolerance Max. 0.4 mm for dimension 800×800mm

SPECIFICATION OF CUTTING MACHINE 13 X 3,000

Manufacturer AMADA – JAPAN
Material CR, GI, SUS
Thickness 3.0 – 13.0 mm
Width 100 – 3,000 mm
Material length  3,000 mm max.
Cutting length 30 – 990 mm
Tolerance ± 0.5 mm for each 1,000 mm length
Diagonal tolerance ± 0.5 mm for each 1,000 mm length

SPECIFICATION OF CUTTING MACHINE 2.5 X 2,000 

Manufacturer

AMADA – JAPAN

Material

CR, GI, SUS

Thickness

0.5 – 2.5 mm

Width

350 – 2,000 mm

Material length 

1,500 mm max.

Cutting length

50 – 500 mm.

Tolerance

± 0.5 mm for each 1,000 mm length

Diagonal tolerance

± 0.5 mm for each 1,000 mm length